+86-0577-62899968
关于Western Gem Electrical
FAQ
-
F: Forming technology for assembling switchboards of household appliances
Q: Solving the forming technology of assembled switchboard for household appliances]: The surface area of assembled switchboard for household appliances is large, and the irregular deformation of the garden is easy to occur during the forming process, so the solving technology is required. -
F: Common Wiring Methods of Plug and Pull Terminals
Q: Plug and pull series of terminals are used for electrical connection. The advantage of the wiring scheme of the plug and pull terminals is quick debugging and no mistake. If in the debugging operation, if the potential equilibrium wires are connected all the time, it is relatively time-consuming and easy to make mistakes. Today I would like to talk about the advantages of the innovative earthing connector. -
F: How to fast connect terminal technology to alleviate the defects of old wiring mode
Q: Compared with the traditional wiring, the rapid wiring terminal technology has the characteristics of safety, convenience, reliability and applicability. The fast connection terminal can effectively alleviate the defects of the old wiring mode by virtue of the high quality contact connection. -
F: The Quality of Terminal Die is Related to the Precision of Terminals.
Q: The quality of terminals in the manufacturing process of terminal moulds, especially in the precise position of terminals, has improved the manufacturing level of terminal industry in China to a certain extent with the development of regional intelligence and precision in the die industry in China. In order to adapt to the increasingly fierce market competition, China's industry is experiencing important changes in recent years, -
F: Selection of wires, threading pipes and switchboards in home decoration
Q: Choose the method of wire, threading pipe and switch panel in household decoration]: How to choose t … -
F: The terminals manufacturers need to constantly develop new technologies.
Q: Wiring terminal manufacturers need to constantly develop and research new technologies]: Wiring terminal manufacturers continue to develop and research new technologies in order to increase their core competitiveness, meet the application needs of the market, and face the fierce competition in the wiring terminal market, only scientific management, strict quality control, continuous excellence. Can get customers' approval. At present, the function of electronic products is increasing. -
F: Application and design requirements of terminals in low voltage electrical apparatus
Q: Application and Design Requirements of Connection Terminal in Low Voltage Electrical Appliances]: This paper attempts to analyze the application and design requirements of Connection Terminal in Low Voltage Electrical Appliances from the principle of insulation coordination and insulation coordination requirements of low voltage equipment. [keywords]: terminal low voltage electrical apparatus [abstract]: insulation coordination of low voltage equipment has higher requirements on terminal from design structure to material selection. -
F: Cause and Solution of Fuse for Copper and Aluminium Terminal of Outdoor Cable
Q: At present, copper-aluminium transition terminals are mostly used in outdoor cable installation, and copper-aluminium transition terminals are also the main faults. Therefore, the author takes eight common copper-aluminium transition terminals used in outdoor cable installation of Nanyang Power Supply Company as an example to explain the main reasons for cable terminal fusing. This is the following analysis. -
F: Product application: application of terminal blocks on isolator
Q: Product Application: Connection Terminals in Isolators]: Isolators are installed by guide rail and wiring by wiring. This product is called Isolation Terminals and is suitable for installation in cabinets. With the development of science and technology, the design of isolation terminals is becoming smaller and smaller, and the purpose of miniaturization is to occupy less space. Of course, users should be allowed to install densely, and there will be heat dissipation in intensive installation.